The furnace "SR 750" is controlled and regulated by an electronic control with microprocessor and has been designed and built for preheating cylinders in order to facilitate fusions in dental and jewelry labs.
The furnace SR 750 can work with 20 heating cycles (or programmes) (15 "Normal" programmes and 5 "Fast" programmes), which are kept in the memory until the operator decides to modify them. Each programme is composed by 6 phases and for each phase it is possible to set 3 variables: temperature, increase rate and holding time.
Furthermore, it is possible to set an ignition delay (up to 100 hours), the fumes aspiration fan on and off temperatures (chimney), and the final temperature holding time at the end of the cycle.
- Settings: temperature, speed, holding time, delay up to 100 h
- Display LCD
- 20 programmes (15 normal and 5 fast)
- Voltage: 230V – 50/60Hz
- Number of phases: 6
- Fuses: 16A
- Maximum temperature: 1100ºC
|External dimensions||32 x 40 x 47 cm||36 x 46 x 49 cm||42 x 53 x 52 cm|
|Chamber dimensions||15 x 15 x 10 cm||18 x 23 x 11.5 cm||23 x 30 x 15 cm|
|Weight||25 Kg||35 Kg||45 Kg|
|Medium cylinders capacity (3x)||9||12||24×2|
|Large cylinders capacity (3x)||2||4||9×2|