The furnace SR725 is controlled and regulated by an electronic control with microprocessor and has been designed and built for preheating cylinders in order to facilitate fusions in dental and jewelry labs.
The furnace SR 725 can work with 2 heating cycles (or programmes) (1 "Normal" programme y 1 "Fast" programme), which are kept in the memory until the operator decides to modify them. The Normal programme can have up to 6 phases and for each phase it is possible to set 3 variables: temperature, increase rate and holding time.
Furthermore, it is possible to set an ignition delay (up to 100 hours), the fumes aspiration fan on and off temperatures (chimney), and the final temperature holding time at the end of the cycle.
- Settings: temperature, speed, holding time, delay up to 100 h
- LCD display
- 2 programmes (normal an fast)
- Voltage: 230V – 50/60Hz
- Number of phases of normal programme: 3
- Fuse 16A
- Maximum temperature: 1100 ºC
|External dimensions||32 x 40 x 47 cm||36 x 46 x 49 cm|| 42 x 53 x 52 cm |
|Chamber dimensions||15 x 15 x 10 cm||18 x 23 x 11.5 cm||23 x 30 x 15 cm|
|Weight||25 Kg||35 Kg||45 Kg|
|Medium cylinders capacity (3x)||9||12||24×2|
|Large cylinders capacity (3x)||2||4||9×2|