Product description
Made completely of stainless steel. Polymerizes 9 or 18 flasks respectively with clamp.
The polymerizer is equipped with a processor to change temperature according to a pre-set programme.
The operator (user) can select the following:
- A delayed start time set in minutes. This means the programme can be pre-set to start at a specific time. The delay works every time the programme is initiated.
- The duration of each temperature increase gradient in minutes.
- The desired holding time in minutes at each plateau.
END OF TREATMENT WARNING BUZZER
- When the programme completes treatment or A4 a modulated warning buzzer is set off for one minute. When the alarm buzzer sounds, press any key to acknowledge the alarm and continue the programme.
- If the power fails the regulator stores all its data, and when power returns it continues from the same point in the programme.
- Programmes and parameters are stored indefinitely when power to the regulator is cut off.
Technical characteristics:
| Outside dimensions | 985-080404 | 985-080406 |
|---|---|---|
| Height (with handle): | 420 mm | 510 mm |
| Width (with drop): | 270 mm | 420 mm |
| Length: | 480 mm | 500 mm |
| Weight: | 15 kg | 20 kg |
| Supply voltage: | 230 V, 50/60 Hz | 230 V, 50/60 Hz |
| Rated power: | 1750 W | 3000 W |
| Inside dimensions | ||
| Height: | 335 mm | 350 mm |
| Width: | 180 mm | 320 mm |
| Length: | 350 mm | 400 mm |
