blank

  • Fri frakt på beställningar över 2000 kr inkl. moms.
  • track-32Trygga betalningar. Faktura- och kortköp.
  • track-32Bli förmånskund och spara pengar (endast företag).
  • track-32Support på 08-6844 22 44 eller info@nordmed.se
Image Alt

Butik

  /    /  CPAP, Medicinsk teknik, Sömn och neurofysiologi  /  Apnea CPAP Utrustning

Apnea CPAP Utrustning

7000 kr

Quantity
Artikelnr: 55049-1 Kategorier: , ,

Product description

CPAP apnea device.

The device of continuous positive air pressure (CPAP) is designed only for the treatment of obstructive sleep apnea (OSA).

Actual treatment:

  • The device provides a continuous steady pressure.
  • The device maintains a constant pressure level during the breathing cycle.If you are prescribed the use of the ramp cycle, when it is on the air flow, you must enable restart button ramp ramp cycle (which reduces air flow pressure and then gradually increased over the period of time ).
  • This will help you sleep more comfortably

Technical features:

Operating temperature
Moisture level
air pressure
5 ~ 30 ºC
≤ 80 % without condensation
Between 860 and 1060 hPa
Transport temperature
Moisture level
air pressure
– 20 ~ 55ºC
≤ % 93 without condensation
Between 500 and 1060 hPa
Regulations Safety requirements IEC 60601-1 medical equipment
IEC 60601-1-2 Electromagnetic compatibility
Treatment for sleep apnea breathing ISO 17510-1
Work mode Continuous
Energy consumption AC 100-240 ACV. 50/60 Hz, 95 VA (max.)
Type and grade of protection against electric shock Class II, type BF
Type and grade of protection against water penetration IPX1 – Drop test – Vertical
Automatic altitude compensation a 0-750 m. level 0, a 751 – 1500 m. level 1, a 1501-2500 m. level 2
Noise level < 30 dB, when the equipment is working in a pressure of 10hPa
Work mode CPAP
Pressure range 4 – 20 hPa (in increments of 0.5 hPa)
Pressure stability 4 – 20 hPa ± 1 hPa

Air flow table:

Test pressure (hPa) 4 8 12 16 20
Average pressure of the patient
connection port (l / min.)
70.1 73.6 75.9 73 73.4

Accessories included:

  • Hand bag (with handle to use as shoulder strap)Air flow table:
  • Filtre
  • Tube
  • Nose Mask
  • Elastic harness to support mask
  • Thermic humidifier

Thermic humidifier:

  • The thermic humidifier with heating is designed only for use with CPAP/Auto CPAP o BPAP. do not use the thermic humidifier with any other equipment
  • The humidifier moistens the air administered by CPAP / BPAP devices.
  • The heated humidifier is used only for a single patient and should not be reused in another person. This prevents the risk of cross infection.
  • The heated humidifier is designed for use with a patient whose upper airways are disabled.
     
Water capacity 350 ml until mark
Ambient operating temperature
Moisture level
air pressure 
5 ~ 30ºC
≤ 80 % without concentration
Between 860 and 1060 hPa
Ambient transport temperature
Moisture level
air pressure 
– 20 ~ 55ºC
≤ % 93 without concentration
Between 500 and 1060 hPa
Regulations  IEC 60601-1 General safety requirements for medical equipment
IEC 60601-1-2 Electromagnetic compatibility
EN ISO 8185:1998 General requirements for humidification system
Heater adjustments  1 – 5 ( 104 – 149 ºF , 40 – 65 ºC )
AC energy consumption  24 DCV , 1.0 A max
Type and grade of protection against electric shock  Class II, type BF
Type and grade of protection against water penetration   IPX1 – Drip test – Vertical
Max working pressure  30 hPa
Pressure with humidifier   60 LPM flow <0,5 hPa
Maximum air output temperature.  < 40 ºC
Humidity interval  10 – 45 mg HO/L

Optional accessories and spare parts:

  • Ref. 869-FILTERCPAP: Filter for CPAP 869 devices
  • Complete face mask for 869-CPAP and 869-AUTO-CPAP apnea

    • Ref. 869-CPAPMASK-M: Size M
    • Ref.869-CPAPMASK-L: Size L