Product description
SEMI-AUTOMATIC EXTERNAL DEFIBRILLATOR
CARDIOLIFE-2100K AED
Defibrillator
- Waveform: Biphasic truncated exponential constant voltage.
- Output power range: 50, 70, 100, 150, 200 J (50 ohm).
- Sequence output power:
- 150 J – 200 J – 200 J for adults.
- 50 J – 70 J – 70 J for children.
- Cycle Time Analyzer-a-SHOCK:
- Less than 8 seconds (when using a new battery).
- Cycle time from the end of CPR to SHOCK:
- Less than 8 seconds (when using a new battery).
- Internal automatic discharge: The stored energy is discharged in the following conditions:
- 30 seconds have passed after the SHOCK BUTTON started flashing.
- Electrode was disconnected from the AED or the patient.
- The power is off.
- ECG appears normal.
- During the self-diagnosis.
- The battery is removed.
Battery
- Output voltage: 30 V, 3 V.
- Life (standby): 2 years.
- Shelf life (storage device separately): 6 years from date of manufacture.
- Capacity: With a new battery at an ambient temperature of 20 ° C, approximately over 70 downloads or more than 120 minutes of continuous operation.
Self-diagnosis
- Daily check: Battery, electrodes, temperature, internal circuit.
- Monthly check: high voltage capacitor with maximum energy power and off, battery, electrodes, temperature, internal circuit.
- If the instrument is turned on and off: Battery, pads, internal circuitry, self history.
- When placing the battery: Battery, electrodes, temperature, internal circuit, charge and discharge energy.
- If abnormalities are detected during self-diagnosis, the status indicator turns red and an alarm sounds.
Analysis of arrhythmia
Precision:
90% or more for VF (sensitivity).
75% or more for VT (sensitivity).
95% or more for non-shockable waveforms (specificity).
Data storage
Total storage: 90 minutes.
Up to 3 cases rescue data (max. 30 min / data).
Indicators
- Status Indicator: Green (normal) or red (abnormal).
- Shock button: Flashes when the shock is ready.
- Indicator electrode position: Flashes when the electrodes are not in contact with the patient.
- Electrode testing indicator: Lights in the following cases: If the electrodes are not connected to the AED, if electrodes are expired, if the electrodes are not suitable for the AED-2100K
- Battery status indicator:
- 100%: 4 green lights
- 75%: 3 green Lights
- 50%: 2 green lights
- 25%: 1 green light
- 0%: red lights
- Child mode LED: Lights if you switch adult mode to child mode.
Dimensions and weight
Dimensions: 250 wide. × 315 deep. × 100 high. (mm).
Weight: 2.5 kg (including battery and electrodes).
Communication
- Interface: Bluetooth (version 2.0. + EDR).
- Maximum Output: 4 dBm.
- Communication distance: about 10 m if no obstructions.
- You must register in accordance with radio legislation to use Bluetooth in each country.
- You can transfer the following data to a PC with Bluetooth interface.
- Device-information (model, serial number, version, etc.).
- Rescue-Data (waveform and ECG events, etc.)
- Self-diagnosis record.
- Battery information (model, serial number, version, number of loads completed, operating time, operating days in standby, remaining battery capacity).
- The following data can be transferred to the AED.
- Time
- Configuration Information
- Software-Version
Environmental conditions
- Operation and standby mode (the battery is inserted and the power off) or shipping for 1 week or longer:
- Temperature 0 to 50 ° C.
- Humidity = 5 to 95% RH (non-condensing).
- Atmospheric pressure of 570-1030 hPa.
- Shipping conditions (less than 1 week):
- Temperature -30 to 65 ° C.
- Humidity: 5 to 95% RH (non-condensing).
- Atmospheric pressure 570-1030 hPa.
- Input Protection: CEI60529: 2001, IP55.
- Vibration:
- MIL-STD-810F 514.5 Category 4.
- MIL-STD-810F 514.5 Category 9.
- Shock:
- IEC 60068-2-27: 1987 50G.
- IEC 60068-2-29: 1987 10G.
- Fall: IEC 60068-2-32: 1975. Amendment 2: 1990 1.2 m.
Spare parts and optional accessories
- Ref. 274-MX216A: Battery 2 years life
- Ref. 274-MX217A: Battery 4 years life
- Ref. 274-MH324A: Electrodes Adult-Pediatric
