• Fri frakt på beställningar över 2000 kr inkl. moms.
  • track-32Trygga betalningar. Faktura- och kortköp.
  • track-32Bli förmånskund och spara pengar (endast företag).
  • track-32Support på 08-6844 22 44 eller info@nordmed.se
Image Alt


  /    /  Handtorkar, Handtorkar manuella med tryckknapp, Klinikinredning  /  Handtork med automatisk sensor Saniflow, rostfritt stål Aisi 304, glansig

Handtork med automatisk sensor Saniflow, rostfritt stål Aisi 304, glansig

5390 kr


Product description


Warm air hand dryer.
Push-button operated.
Maximum power and airflow.
Maximum robustness and vandal-proof.
Suitable for very high traffic facilities.
It normally goes along with a soap dispenser.

Technical characteristics:

Stainless steel AISI 304 one-piece cover bright finish, 1,5 mm thick. Cover fixed to the base by means of 2 vandal-proof lock screws and lock with special Saniflow ® wrench.
• Base in aluminium, 3 mm thick, with 4 Ø 8 mm holes for wall mounting.
• Fire resistant plastic UL 94-VO fan scroll.
• Universal brush motor, 5500 rpm, F class, incorporates a safety thermostat and a self-resetable thermal cut-off at 120 ºC.
• Aluminium centrifugal double symmetrical inlet fan wheel.
• Waved wire NiCr heating element on a mica frame that incorporates a self-resetable thermal cut-off at 80 ºC.
• Nozzle in chrome plated zamak, 22 μ thick.
• Push-button in chrome plated zamak, 22 μ thick, that activates an electronic timer with a 35 second cycle.

Voltage 220-240 V
Frequency 50 / 60 Hz
Electrical insulation Class I
Dimensions 245x 276x 210 mm
Weight 4.9 Kg
Effective airflow 330 m3 / h / 5500 l / min
Nominal flow rate 470 m3 / h / 7800 l / min
Air speed 96 Km / h
Total power 2250 W
Engine 250 W
Power Resistance 2000 W
Consumption 10 A
r.p.m. 5500
T. air (D = 10 cm / T amb = 21 º C) 53 º C
Noise level (2 m) 70 dB
Index protection IP23
Ideal location

Between sink and door. It is recommended not to install between sink, or beside
urinals, toilets and showers. On automatic models, when installed on a marble ledge, the minimum distance from the dryer to the ledge must be 400mm. It is recommended that hand dryers be distributed throughout the basin area to avoid overcrowding.