• Fri frakt på beställningar över 2000 kr inkl. moms.
  • track-32Trygga betalningar. Faktura- och kortköp.
  • track-32Bli förmånskund och spara pengar (endast företag).
  • track-32Support på 08-6844 22 44 eller info@nordmed.se
Image Alt


  /    /  Handtorkar, Handtorkar automatiska, Klinikinredning  /  Handtork med automatisk sensor Mediflow Basic, vitt epoxybehandlat stål

Handtork med automatisk sensor Mediflow Basic, vitt epoxybehandlat stål

4090 kr

Artikelnr: 33965 Kategorier: , ,

Product description


• Warm air hand dryer.
• Sensor operated.
• Maximum power and airflow.
• Maximum robustness and vandal-proof.
• Suitable for very high traffic facilities.
• Recessed kit that conforms to ADAAG projection also available.
• It normally goes along with a soap dispenser.

Technical characteristics:

• Steel one-piece high quality and high impact cover white epoxy coated, 1,9 mm thick. Cover fixed to the base by means of 2 vandal-proof lock screws and lock with special Mediflow ® wrench.
• Fire resistant plastic UL 94-V0 base and fan scroll, with 4 Ø 8 mm holes for wall mounting. It includes silent-blocks to damp mechanical vibrations.
• Universal brush motor, 4.500 rpm, F class, includes a self-resetable thermal cut-off at 120 ºC.
• Aluminium centrifugal double asymmetrical inlet fan wheel.
• Fe, Al & Cr taped wire heating element mounted on a mica frame that incorporates a self-resetable thermal cut-off at 80 ºC.
• Two distances (15/25 cm) IR electronic detection sensor with polycarbonate viewing window.

Place the hands under the air outflow valve. The dryer will start automatically, and go on with no interruption as long as the hands are kept in the detection range of the sensor. The appliance will stop 2 seconds after the hands are removed from the airflow.

Voltage 220-240 V
Frequency 50/60 Hz
Electrical insulation Class II
Dimensions 320x 272X 164 mm
Weight 4.85 kg
Effective airflow 450 m³ / h / 7,500 l / min
Nominal flow rate 540 m³ / h / 9000 l / min
Air speed 95 Km / h
Total power 2750 W
Engine 250 W
Power Resistance 2500 W
Consumption 12 A
r.p.m. 4500
T. air (D = 10 cm / T amb = 21 º C) 49 º C
Noise level (2 m) 65 dB
Index protection IP23
Ideal location

Between sink and door. It is recommended not to install between sink, or next to urinals, toilets and showers. On automatic models, when installed on a marble ledge, the minimum distance from the dryer to the ledge must be 400mm. It is recommended that hand dryers be distributed throughout the basin area to avoid overcrowding.