• Fri frakt på beställningar över 2000 kr inkl. moms.
  • track-32Trygga betalningar. Faktura- och kortköp.
  • track-32Bli förmånskund och spara pengar (endast företag).
  • track-32Support på 08-6844 22 44 eller info@nordmed.se
Image Alt


  /    /  Handtorkar, Handtorkar automatiska, Klinikinredning  /  Handtork med automatisk sensor Machflow, rostfritt stål Aisi 304, glansig

Handtork med automatisk sensor Machflow, rostfritt stål Aisi 304, glansig

5250 kr

Artikelnr: 33979 Kategorier: , ,

Product description

  • High speed motor. Maximum air velocity 325 Km/h
  • Ecological: very low power consumption
  • Sensor operated
  • Maximum air power and effective airflow
  • Antivandalism features
Technical characteristics:
  • Stainless steel once-piece cover bright finish, 1.5 mm thick. Cover fixed to the base by means af 2 allen lock screws and lock with allen wrench.
  • ABS base for wall mounting. It inclues 8 silent-locks to damp mechanical vibrations.
  • High speed motor. Vacuum universal motor brush, F class, 19000-30000 rpm. RPM may be adjusted manually by means of a potentiometer.
  • Vacuum aluminium inlet fan wheel.
  • Heating element free.
  • Automatic disconection system after 60 seconds of continuous use.
  • Fully adjustable (5-20 cm) IR electronic detection sensor by means of a potentiometer

Place the hands under the air outflow valve. The dryer will start automatically, and go on with no interruption as long as the hands are kept in the detection range of the sensor. The appliance will stop 2 seconds after the hands are removed from the airflow. As a safety measure, the appliance will stop after 60 seconds.

Voltage 220-240 V
  Frequency 50-60 Hz
  Electrical insulation Class I
  Consumption 3,3-4,7 A
  Drying Time 8.12 sec
  Speed max. air 325 Km / h
  Total power 420-1150 W
  Protection Index IP23
  Automatic shutdown 60 sec
  r.p.m. 19.000-30.000
  Weight 4,7 Kg
  Noise level (to 2m) 68-75 dB
Low consumption, environmentally friendly!.


Ideal location

Between sink and door. It is recommended not to install between sink, or next to urinals, toilets and showers. On automatic models, when installed on a marble ledge, the minimum distance from the dryer to the ledge must be 400mm. It is recommended that hand dryers be distributed throughout the basin area to avoid overcrowding.