• Fri frakt på beställningar över 2000 kr inkl. moms.
  • track-32Trygga betalningar. Faktura- och kortköp.
  • track-32Bli förmånskund och spara pengar (endast företag).
  • track-32Support på 08-6844 22 44 eller info@nordmed.se
Image Alt

Butik

  /    /  Autoklaver, Autoklaver och sterilisering, Klass S-autoklav  /  Ångautoklav med vakuum pump Adromeda vacuum XP 15 liter

Ångautoklav med vakuum pump Adromeda vacuum XP 15 liter

56100 kr60800 kr

Nollställ
Quantity

Product description

  • The ANDROMEDA VACUUM XP is equipped with a powerful vacuum pump which, at the beginning of the cycle, expels any air pockets still present inside the chamber and, at the end of the sterilization phase, guarantees perfect drying of the materials treated. A sophisticated electronic system ensures constant monitoring of pressure, temperature and time. It can work also without the presence of the operator, as all the functions are automatic. The ANDROMEDA VACUUM XP has an electromagnetic block device on the door. The total automatism of each phase of the cycle safeguards against human error, even by inexperienced personnel. Stainless steel chamber, uniformly heated by a band heating element. Twin tank for clean and used water: ANDROMEDA VACUUM XP has 5 sterilization cycles: 121° C and 134° C for unwrapped and wrapped instruments, and a “fl ash” cycle for rapid sterilization. The ANDROMEDA VACUUM XP is supplied with the printer built-in-into the drive board.

Models:

  •  048-2053-S         15 litres
  • 048-2053CL-S     18-20 litres

 Mechanical pump-generated vacuum

  • Autoclave models Andromeda Vacuum Xp Plus – Andromeda Vacuum Xp have a pump-generated vacuum system. Before the sterilization cycle starts, a pump generates a powerful depression or vacuum, removing all the air pockets still present in the sterilization chamber, and inside the wrappings and materials themselves. The vacuum pump is constructed with special membranes for the aspiration of hot air and steam. Pump-generated vacuum ensures optimum quality of the sterilization cycle for both wrapped and unwrapped instruments. At the end of the sterilization cycle, the pump starts up again to facilitate and improve the drying phase. This vacuum system is adopted for autoclaves with the capacity to sterilize S-type loads.

Andromeda Vacuum XP features

  • Built-in printer
  • Provision for PC connection
  • Provision for memory card connection
  • Provision for connection to the water mains
  • 5 Operating cycles

Technical features:

  • Height mm 385
  • Width mm 450
  • Depth mm 540
  • Main Voltage 230 V ±10% A.C.
  • Weight Kg 50
  • Frequency 50 / 60 Hz
  • Chamber diameter mm 243
  • Chamber depth mm 320

 

Mer information

Product Option

,